DIAZODEVELOP P 975 – 1+9
CONCENTRATED ACTION– CONTROLLED DEVELOPER AND REPLENISHER
|FOR PRESENSITIZED POSITIVE PLATES|
|CHARACTERISTICS:||Concentrated action-controlled developer and replenisher to be used only
diluted, as indicated, to obtain after dilution 10 liters ready-to-use product or 5 liters replenisher for each liter of concentrated product. It contains substances which reduce forming of calcareous incrustations in Plate Processors, keeping clean rollers and tanks clean.
|1) Manual or tray development: dilute 1 liter product in 9 liters water.
2) Development in automatic plate processing machine: dilute 1 liter product in 9 liter water.
3) Replenisher: dilute 1 liter product in 4 liter water.
|Developer DIAZODEVELOP P 975 can be used both in automatic processing machine and with pads. Working temperature is 20-24°C and immersion time is 30“ approx. The replenisher DIAZODEVELOP P 975 has to be used only in processing machines with a quantity of approx. 50-70 ml/sqm of developed plates. Increase replenisher quantity up. to 100-120 ml/sqm, when using the product in a “spray system” processing machine or in case of low production (less than 10 sqm/day).|
|BOILING POINT:||> 100°C|
|FLASH POINT:||Non infiammabile|
|SOLUBILITÀ IN ACQUA:||Complete in water|
|PRECAUTIONS:||Check the results obtained on the plate with the new developer bath by means of UGRA Wedge 82 and check it in time, eventually adjusting replenisher rate. Before using DIAZODEVELOP P975 the first time, we suggest to clean the Plate Processing machine with SOLVINE CTP. Rinse carefully to eliminate incrustations which could come off using the product.|
|PACKING:||Carton containing 6 bottles to prepare 60 liters ready-to-use product or 30 liters replenisher.|